Skip to main content

Engineer's DNS Intelligence Report

valentin.run
21 Mar 2026, 14:47 UTC · 23.2s ·v26.38.03 · SHA-3-512: 674d✱✱✱✱ Verify ·Cross-Referenced
Recon ModeRecon Mode Snapshot Re-analyze New Domain
Footprint
DNS Security & Trust Posture
Risk Level: Low Risk
6 protocols configured, 3 not configured Why we go beyond letter grades
Resolver agreement is inconsistent for some protocols, limiting confidence. Data currency and system maturity are adequate.
Accuracy 59% Currency 83/100 Maturity verified
Limiting factor: Resolver agreement is low for this scan — some protocols returned inconsistent results across resolvers
Currentness Excellent TTL Compliance Excellent Completeness Degraded Source Credibility Excellent TTL Relevance Good
ICuAE Details
DNS data is mostly current with minor gaps — good intelligence currency

The following DNS record TTLs deviate from recommended values. Incorrect TTLs can cause caching issues, slow propagation, or unnecessary DNS traffic.

Record Type Observed TTL Typical TTL Severity Context
SOA 6 hours (21600s) 1 hour (3600s) high SOA TTL is above typical — observed 6 hours (21600s), typical value is 1 hour (3600s). Long TTLs reduce DNS query volume but slow propagation when records change. Consider 3600 seconds for a balance of performance and flexibility per NIST SP 800-53 SI-7 relevance guidance.
NS 6 hours (21600s) 1 day (86400s) medium NS TTL is below typical — observed 6 hours (21600s), typical value is 1 day (86400s). Short TTLs increase DNS query volume but enable faster propagation. If you are preparing for a migration or need rapid failover, this may be intentional (RFC 1035 §3.2.1). For steady-state production, consider 86400 seconds per NIST SP 800-53 SI-7 relevance guidance. Use the TTL Tuner for profile-specific recommendations.

Big Picture Questions

  • How often do you actually change this record? If it hasn’t changed in months, a short TTL is generating unnecessary DNS queries without any benefit.
  • Are you preparing for a migration or IP change? Short TTLs make sense temporarily — but should be raised back to 1 hour (3600s) once the change is complete.
  • Every DNS lookup adds 20–150ms of latency. With a 60s TTL, returning visitors trigger a fresh lookup every minute. With 3600s, they get cached responses for an hour — faster page loads, no extra infrastructure needed.
  • Google runs A records at ~30s because they operate a global anycast network and need to steer traffic dynamically. For a typical website without that infrastructure, copying those TTLs increases query volume with zero upside.
Tune TTL for valentin.run
Reference: NIST SP 800-53 SI-7 (Information Integrity) · RFC 8767 (Serve Stale) · RFC 1035 §3.2.1 (TTL semantics) Note: Some DNS providers (e.g., AWS Route 53 alias records, Cloudflare proxied records) enforce fixed TTLs that cannot be modified. If a finding targets a record you cannot edit, it reflects the observed value rather than a configuration error on your part.
Primary NS ns1.your-server.de
Serial 2026030126
Admin hostmaster.valentin.run
Provider Unknown
Timer Value RFC 1912 Range
Refresh86400s1,200–43,200s (20 min – 12 hrs)
Retry10800sFraction of Refresh
Expire3600000s1,209,600–2,419,200s (14–28 days)
Minimum (Neg. Cache)3600s300–86,400s (5 min – 1 day)
All SOA timer values are within RFC 1912 recommended ranges.
Email Spoofing
Protected
Brand Impersonation
Not Setup
DNS Tampering
Unsigned
Certificate Control
Configured
Monitoring
DKIM signing inferred from provider — could not directly verify selector
Configured
SPF (hard fail), DMARC (reject), DKIM (inferred via Unknown), MTA-STS, TLS-RPT, CAA
Not Configured
BIMI, DANE, DNSSEC
Priority Actions Achievable posture: Secure
Medium Enable DNSSEC

DNSSEC is not enabled for this domain. DNSSEC provides cryptographic authentication of DNS responses, preventing cache poisoning and DNS spoofing attacks.

Low Add BIMI Record

Your domain has DMARC reject — you qualify for BIMI, which displays your brand logo in receiving email clients that support it (Gmail, Apple Mail, Yahoo).

BIMI displays your verified brand logo next to your emails in supporting mail clients.
FieldValue
TypeTXT
Hostdefault._bimi.valentin.run (BIMI default record)
Valuev=BIMI1; l=https://valentin.run/brand/logo.svg
Registrar (RDAP) OBSERVED LIVE
Key-Systems, LLC
Where domain was purchased
Email Service Provider
Unknown
Strongly Protected
Web Hosting
Unknown
Where website is hosted
DNS Hosting
Unknown
Where DNS records are edited
Email Security Methodology Can this domain be impersonated by email? No SPF and DMARC reject policy enforced

SPF Record RFC 7208 §4 Consistent

Does this domain declare who may send email on its behalf? Yes
Success -all

SPF valid with strict enforcement (-all), 0/10 lookups

v=spf1 ip4:37.17.239.253 -all
RFC 7208 Conformant — This SPF record conforms to the syntax and semantics defined in RFC 7208 §4.
RFC Failure Mode: Unlike DMARC (where unknown tags are silently ignored per RFC 7489 §6.3), SPF with unrecognized mechanisms produces a PermError per RFC 7208 §4.6 — the record fails loudly rather than silently.
Related CVEs: CVE-2024-7208 (multi-tenant domain spoofing), CVE-2024-7209 (shared SPF exploitation), CVE-2023-51764 (SMTP smuggling bypasses SPF)
SPF hard fail (-all): compliance-strong, but can short-circuit DMARC. RFC 7489 notes that -all can cause some receivers to reject mail during the SMTP transaction — before DKIM is checked and before DMARC can evaluate the result. A message that would pass DMARC via DKIM alignment may be rejected prematurely. For most domains, ~all + DMARC p=reject is the strongest compatible posture — it allows every authentication method (SPF, DKIM, DMARC) to be fully evaluated before a decision is made.
DMARC is set to reject — enforcement is strong. However, some receivers may still reject messages on SPF hard fail before DKIM alignment is checked. Switching to ~all + p=reject would provide the same enforcement with full DMARC compatibility.

DMARC Policy RFC 7489 §6.3 Consistent

Are spoofed emails rejected or quarantined? Yes — reject policy
Success p=reject

DMARC policy reject (100%) - excellent protection

v=DMARC1; p=reject; adkim=r; aspf=r; rua=mailto:v@valentin.run
Alignment: SPF relaxed DKIM relaxed
No np= tag (DMARCbis) — non-existent subdomains inherit p= policy but adding np=reject provides explicit protection against subdomain spoofing
No forensic reporting (ruf) tag — this is correct. The absence of ruf= is not a gap. RFC 7489 §7.3 warns that forensic reports can expose PII (full message headers or bodies). Google, Microsoft, and Yahoo do not honour ruf= requests regardless. The DMARCbis draft (draft-ietf-dmarc-dmarcbis) has formally removed ruf= from the specification, confirming its deprecation. Omitting ruf= is the recommended modern practice. RFC 7489 §7.3 — Forensic Reports
RFC 7489 Conformant — DMARC record conforms to RFC 7489 §6.3 with full enforcement.
DMARCbis (Pending): draft-ietf-dmarc-dmarcbis will elevate DMARC to Standards Track, obsolete RFC 7489, replace pct= with t= (testing flag), add np= (non-existent subdomain policy), and mandate DNS tree walk for policy discovery instead of the Public Suffix List.
Related CVEs: CVE-2024-49040 (Exchange sender spoofing), CVE-2024-7208 (multi-tenant DMARC bypass)

DKIM Records RFC 6376 §3.6 Consistent

Are outbound emails cryptographically signed? Not discoverable
Not Discoverable

DKIM not discoverable via common selectors (large providers use rotating selectors)

RFC 6376 (Provider-Managed) — DKIM signing managed by the detected mail provider per RFC 6376.
Known Vulnerabilities: DKIM l= tag body length vulnerability (attacker appends unsigned content to signed mail), weak key exploitation (keys below 1024-bit are cryptographically breakable per RFC 6376 §3.3.3), DKIM replay attacks (re-sending legitimately signed messages at scale)

MTA-STS RFC 8461 §3 Consistent

Can attackers downgrade SMTP to intercept mail? No — TLS enforced
success ENFORCE Policy Verified

MTA-STS enforced - TLS required for 1 mail server(s)

v=STSv1; id=202603012145
Policy Details:
  • Mode: enforce
  • Max Age: 7 days (604800 seconds)
  • MX Patterns: mail.anva.ch

MTA-STS policy enforcement is evaluated in Mail Transport Security below.

TLS-RPT RFC 8460 §3 Consistent

Will failures in TLS delivery be reported? Yes — reports configured
success

TLS-RPT configured - receiving TLS delivery reports

v=TLSRPTv1; rua=mailto:tls-reports@valentin.run

DANE / TLSA Consistent Recon Methodology Can mail servers establish identity without a public CA? via MTA-STS (CA)
RFC 7672 §3 RFC 6698 §2 Not Configured

No DANE/TLSA records found (checked 1 MX host)

DANE (RFC 7672) binds TLS certificates to DNSSEC-signed DNS records, protecting email transport against man-in-the-middle attacks and rogue CAs. It is the primary transport security standard — MTA-STS (RFC 8461) was created as the alternative for domains that cannot deploy DNSSEC. Over 1 million domains use DANE globally, including Microsoft Exchange Online, Proton Mail, and Fastmail. Best practice: deploy both for defense in depth.

Email Transport Security

Two mechanisms protect email in transit. DANE is the primary standard; MTA-STS is the alternative for domains that cannot deploy DNSSEC:

  • DNSSEC + DANE (RFC 7672) — Cryptographic chain of trust from DNS root to mail server certificate. Eliminates reliance on certificate authorities. No trust-on-first-use weakness. Requires DNSSEC.
  • MTA-STS (RFC 8461) — HTTPS-based policy requiring TLS for mail delivery. Works without DNSSEC but relies on CA trust and is vulnerable on first use (§10). Created for domains where “deploying DNSSEC is undesirable or impractical” (§2).
This domain uses MTA-STS without DANE. MTA-STS provides transport security through HTTPS-based policy (RFC 8461), but relies on CA trust and is vulnerable on first use. Adding DANE (RFC 7672) would provide cryptographic certificate pinning independent of certificate authorities — this domain would first need to enable DNSSEC.

Industry trend: Microsoft Exchange Online enforces inbound DANE with DNSSEC (GA October 2024), and providers like Proton Mail and Fastmail also support DANE. Google Workspace does not support DANE and relies on MTA-STS. Both mechanisms coexist because DANE is backward-compatible — senders skip the check if the domain isn't DNSSEC-signed (RFC 7672 §1.3).


Brand Security Can this brand be convincingly faked? Possible DMARC reject policy blocks email spoofing (RFC 7489 §6.3) and CAA restricts certificate issuance (RFC 8659 §4), but no BIMI brand verification — lookalike domains display identically in inboxes without visual proof of authenticity

BIMI BIMI Spec Consistent Warning

Is the brand identity verified and displayed in inboxes? No

No valid BIMI record found

CAA RFC 8659 §4 Consistent Success

Does this domain restrict who can issue TLS certificates? Yes

CAA configured - only Let's Encrypt can issue certificates

Authorized CAs: Let's Encrypt
0 issue "letsencrypt.org"
Since September 2025, all public CAs must verify domain control from multiple geographic locations (Multi-Perspective Issuance Corroboration, CA/B Forum Ballot SC-067). CAA records are now checked from multiple network perspectives before certificate issuance.
Vulnerability Disclosure Policy (security.txt) Is there a verified way to report security issues? No RFC 9116

Could not fetch security.txt

Fetch error: SSL error
A security.txt file at /.well-known/security.txt provides security researchers with a standardized way to report vulnerabilities. See securitytxt.org for a generator.


AI Surface Scanner Beta Is this domain discoverable by AI — and protected from abuse? Yes

AI governance signals observed

llms.txt llmstxt.org
Is this domain publishing AI-readable brand context? Yes
llms.txt found — domain provides structured context for LLMs View llms.txt
llms-full.txt also found (extended LLM context) View llms-full.txt
AI Crawler Governance (robots.txt) RFC 9309 IETF Draft
Are AI crawlers explicitly allowed or blocked? Not blocked
No AI crawler blocking observed — no blocking directives found in robots.txt View robots.txt
Content-Usage Directive IETF Draft
Does the site express AI content-usage preferences? Not Configured
No Content-Usage directive detected. The IETF AI Preferences working group is developing a Content-Usage: directive for robots.txt that lets site owners declare whether their content may be used for AI training and inference. This is an active draft, not yet a ratified standard.
Example: Add Content-Usage: ai=no to robots.txt to deny AI training, or Content-Usage: ai=allow to explicitly permit it. Without this directive, AI crawler behavior depends on individual crawler policies and User-agent rules.
AI Recommendation Poisoning
Is this site trying to manipulate AI recommendations? No
No AI recommendation poisoning indicators found
Hidden Prompt Artifacts
Is hidden prompt-injection text present in the source? No
No hidden prompt-like artifacts detected
Evidence Log (3 items)
TypeDetailSeverityConfidence
llms_txt_found llms.txt file found providing structured LLM context info Observed
llms_full_txt_found llms-full.txt also found (extended LLM context) info Observed
robots_txt_no_ai_blocks robots.txt found but no AI-specific blocking directives low Observed
Public Exposure Checks Are sensitive files or secrets exposed? No

No exposed secrets detected in public page source — same-origin, non-intrusive scan of publicly visible page source and scripts.

No exposed secrets, API keys, or credentials were detected in publicly accessible page source or scripts.
What type of scan is this?

This is OSINT (Open Source Intelligence) collection — we check the same publicly accessible URLs that any web browser could visit. No authentication is bypassed, no ports are probed, no vulnerabilities are exploited.

Is this a PCI compliance scan? No. PCI DSS requires scans performed by an Approved Scanning Vendor (ASV) certified by the PCI Security Standards Council. DNS Tool is not an ASV. If you need PCI compliance scanning, engage a certified ASV such as Qualys, Tenable, or Trustwave.

Is this a penetration test? No. Penetration testing involves active exploitation attempts against systems with authorization. Our checks are passive observation of publicly accessible resources — the same methodology used by Shodan, Mozilla Observatory, and other OSINT platforms.

DNS Server Security Hardened

No DNS server misconfigurations found on ns1.your-server.de — Nmap NSE probes for zone transfer (AXFR), open recursion (RFC 5358), nameserver identity disclosure, and DNS cache snooping.

Check Result Detail
Zone Transfer (AXFR) Denied Test inconclusive
Open Recursion Disabled Test inconclusive
Nameserver Identity Hidden Test inconclusive
Cache Snooping Protected Test inconclusive

Tested nameservers: ns1.your-server.de, ns3.second-ns.de, ns.second-ns.com

Delegation Consistency 1 Issue

Delegation consistency: 1 issue(s) found — Parent/child NS delegation alignment: DS↔DNSKEY, glue records, TTL drift, SOA serial sync.

Findings:
  • Could not retrieve NS TTL from parent zone

DS ↔ DNSKEY Alignment Aligned

Glue Record Completeness Complete

NameserverIn-BailiwickIPv4 GlueIPv6 GlueStatus
ns.second-ns.com No N/A N/A OK
ns1.your-server.de No N/A N/A OK
ns3.second-ns.de No N/A N/A OK

NS TTL Comparison Drift

Child TTL: 86400s Drift: 0s

SOA Serial Consistency Consistent

ns.second-ns.com: 2.026030126e+09
ns1.your-server.de: 2.026030126e+09
ns3.second-ns.de: 2.026030126e+09
Nameserver Fleet Matrix Healthy

Analyzed 3 nameserver(s) for valentin.run — Per-nameserver reachability, ASN diversity, SOA serial sync, and lame delegation checks.

Nameserver IPv4 IPv6 ASN / Operator UDP TCP AA SOA Serial
ns.second-ns.com 213.239.204.242 2a01:4f8:0:a101::b:1 AS24940
Hetzner Online GmbH
2026030126
ns1.your-server.de 213.133.100.102 2a01:4f8:0:1::5ddc:1 AS24940
Hetzner Online GmbH
2026030126
ns3.second-ns.de 193.47.99.4 2001:67c:192c::add:b3 AS12337 2026030126
Unique ASNs
2
Unique Operators
1
Unique /24 Prefixes
3
Diversity Score
Good

2 ASNs, 3 /24 prefixes across 3 nameservers

Mail Transport Security Beta Is mail transport encrypted and verified? Yes MTA-STS enforces TLS for all inbound mail delivery

All 1 server(s) verified: encrypted transport confirmed via direct SMTP probe and DNS policy

Policy Assessment Primary
  • MTA-STS policy in enforce mode requires encrypted transport (RFC 8461)
  • TLS-RPT configured — domain monitors TLS delivery failures (RFC 8460)
Telemetry
TLS-RPT configured — domain receives reports about TLS delivery failures from sending mail servers (RFC 8460)
Reporting to: mailto:tls-reports@valentin.run
Live Probe Supplementary
MX Host STARTTLS TLS Version Cipher Certificate
mail.valentin.run TLSv1.3 TLS_AES_256_GCM_SHA384 Invalid
Certificate invalid: tls: failed to verify certificate: x509: certificate has expired or is not yet valid: current time 2
Multi-Vantage Probe Results
Split verdict 2 probes, 1 responded
France - EU skipped
3.710328733s
US-East (Boston) observed
Partial TLS support
Infrastructure Intelligence Who hosts this domain and what services power it? Direct

ASN / Network Success

Resolved 1 unique ASN(s) across 1 IP address(es)

ASNNameCountry
AS13030 CH
IPv4 Mappings:
37.17.239.253AS13030 (37.17.232.0/21)

Edge / CDN SUccess

Domain appears to use direct origin hosting

SaaS TXT Footprint