Skip to main content
Registry Zone Health Intelligenceme is a shared registry suffix.
This report focuses on zone infrastructure health: DNSSEC signing, nameserver diversity, certificate authority policy, and delegation security. Email authentication protocols (SPF, DMARC, DKIM) are not applicable to registry suffixes — they apply to domains registered under this zone.
Registry operators, ICANN, and ccTLD authorities can use this view to assess zone security posture.

Registry Zone Health Report

me
4 Mar 2026, 15:34 UTC · 8.7s ·v26.33.96 · SHA-3-512: 07ac✱✱✱✱ Verify
Recon ModeRecon Mode Snapshot Re-analyze New Domain
Footprint
Analysis Confidence (ICD 203)
LOW 39/100
Significant disagreement between resolvers undermines confidence in the analysis results.
Accuracy 21% Currency 73/100 Maturity verified
Limiting factor: Resolver agreement is low for this scan — some protocols returned inconsistent results across resolvers
Intelligence Currency
Data Currency: Adequate 73/100
ICuAE Details
Currentness Excellent TTL Compliance Excellent Completeness Stale Source Credibility Excellent TTL Relevance Adequate
DNS data shows some aging or gaps — consider re-scanning for critical decisions

The following DNS record TTLs deviate from recommended values. Incorrect TTLs can cause caching issues, slow propagation, or unnecessary DNS traffic.

Record Type Observed TTL Typical TTL Severity Context
NS 1 hour (3600s) 1 day (86400s) high NS TTL is below typical — observed 1 hour (3600s), typical value is 1 day (86400s). Short TTLs increase DNS query volume but enable faster propagation. If you are preparing for a migration or need rapid failover, this may be intentional (RFC 1035 §3.2.1). For steady-state production, consider 86400 seconds per NIST SP 800-53 SI-18 relevance guidance. Use the TTL Tuner for profile-specific recommendations.

Big Picture Questions

  • How often do you actually change this record? If it hasn’t changed in months, a short TTL is generating unnecessary DNS queries without any benefit.
  • Are you preparing for a migration or IP change? Short TTLs make sense temporarily — but should be raised back to 1 hour (3600s) once the change is complete.
  • Every DNS lookup adds 20–150ms of latency. With a 60s TTL, returning visitors trigger a fresh lookup every minute. With 3600s, they get cached responses for an hour — faster page loads, no extra infrastructure needed.
  • Google runs A records at ~30s because they operate a global anycast network and need to steer traffic dynamically. For a typical website without that infrastructure, copying those TTLs increases query volume with zero upside.
Tune TTL for me
Reference: NIST SP 800-53 SI-7 (Information Integrity) · RFC 8767 (Serve Stale) · RFC 1035 §3.2.1 (TTL semantics)
Primary NS a0.nic.me
Serial 1772638177
Admin hostmaster.donuts.email
Provider Unknown
Timer Value RFC 1912 Range
Refresh7200s1,200–43,200s (20 min – 12 hrs)
Retry900sFraction of Refresh
Expire1209600s1,209,600–2,419,200s (14–28 days)
Minimum (Neg. Cache)3600s300–86,400s (5 min – 1 day)
All SOA timer values are within RFC 1912 recommended ranges.
Registry Zone Health
DNSSEC: Success 5 Nameservers
Zone infrastructure protocols applicable to registry suffixes
Email Spoofing
N/A — Registry
Brand Impersonation
N/A — Registry
DNS Tampering
Protected
Certificate Control
N/A — Registry
Configured
DNSSEC
Registrar (RESTRICTED) LIVE
Registry Restricted
.me restricts public WHOIS
Email Service Provider
Unknown
Unprotected
Web Hosting
Unknown
Where website is hosted
DNS Hosting
Unknown
Where DNS records are edited


DNS Server Security Hardened

No DNS server misconfigurations found on b2.nic.me — Nmap NSE probes for zone transfer (AXFR), open recursion (RFC 5358), nameserver identity disclosure, and DNS cache snooping.

Check Result Detail
Zone Transfer (AXFR) Denied Zone transfer denied (correct configuration)
Open Recursion Disabled Recursion disabled (correct configuration)
Nameserver Identity Hidden No nameserver identity information disclosed
Cache Snooping Protected Cache snooping not possible (correct configuration)

Tested nameservers: b2.nic.me, a0.nic.me, a2.nic.me, b0.nic.me, c0.nic.me

Delegation Consistency 7 Issues

Delegation consistency: 7 issue(s) found — Parent/child NS delegation alignment: DS↔DNSKEY, glue records, TTL drift, SOA serial sync.

Findings:
  • DNSKEY records missing at child — DS records at parent have no matching keys
  • In-bailiwick NS a0.nic.me has no glue records at parent — resolution may fail
  • In-bailiwick NS a2.nic.me has no glue records at parent — resolution may fail
  • In-bailiwick NS b0.nic.me has no glue records at parent — resolution may fail
  • In-bailiwick NS b2.nic.me has no glue records at parent — resolution may fail
  • In-bailiwick NS c0.nic.me has no glue records at parent — resolution may fail
  • Could not retrieve NS TTL from parent zone

DS ↔ DNSKEY Alignment Misaligned

Unmatched DS records (no corresponding DNSKEY):
Key Tag: 45352, Algorithm: 8

Glue Record Completeness Incomplete

NameserverIn-BailiwickIPv4 GlueIPv6 GlueStatus
a0.nic.me Missing
a2.nic.me Missing
b0.nic.me Missing
b2.nic.me Missing
c0.nic.me Missing

NS TTL Comparison Drift

Child TTL: 3600s Drift: 0s

SOA Serial Consistency Consistent

a0.nic.me: 1.772638177e+09
a2.nic.me: 1.772638177e+09
b0.nic.me: 1.772638177e+09
b2.nic.me: 1.772638177e+09
c0.nic.me: 1.772638177e+09
Nameserver Fleet Matrix Healthy

Analyzed 5 nameserver(s) for me — Per-nameserver reachability, ASN diversity, SOA serial sync, and lame delegation checks.

Nameserver IPv4 IPv6 ASN / Operator UDP TCP AA SOA Serial
c0.nic.me 199.253.61.1 2001:500:55::1 AS12041 1772638177
b0.nic.me 199.253.60.1 2001:500:54::1 AS12041 1772638177
b2.nic.me 199.249.127.1 2001:500:4f::1 AS207266 1772638177
a0.nic.me 199.253.59.1 2001:500:53::1 AS12041 1772638177
a2.nic.me 199.249.119.1 2001:500:47::1 AS207266 1772638177
Unique ASNs
2
Unique Operators
0
Unique /24 Prefixes
5
Diversity Score
Good

2 ASNs, 5 /24 prefixes across 5 nameservers

DNSSEC Operations Deep Dive 2 Issues

DNSSEC operational notes: 2 item(s) to review — KSK/ZSK differentiation, RRSIG expiry windows, NSEC/NSEC3 analysis, and rollover readiness.

Findings:
  • NSEC3 uses a non-empty salt; RFC 9276 recommends empty salt for new deployments
  • Single KSK with no CDS/CDNSKEY automation — manual rollover required

DNSKEY Inventory 3 Keys

RoleKey TagAlgorithmKey Size
ZSK 48861 RSA/SHA-256 1056 bits
ZSK 39003 RSA/SHA-256 1056 bits
KSK 45352 RSA/SHA-256 2088 bits

RRSIG Signatures 1 Signature

TypeKey TagExpiryStatus
NS 48861 2026-03-22T15:47:42Z Active

Denial of Existence NSEC3

Iterations: 0
Salt Length: 1 bytes
Hash Algorithm: 1 (SHA-1)

Rollover Readiness Not_ready

Multiple KSKs:
CDS Published:
CDNSKEY Published:
Automation: none

Zone Signing & DNSSEC Methodology Is this zone cryptographically signed? YES DNSSEC signed and validated, cryptographic chain of trust verified

DNSSEC RFC 4033 §2 Verified Signed RSA/SHA-256 Adequate

DNSSEC fully configured and validated — AD (Authenticated Data) flag set by resolver 8.8.8.8 confirming cryptographic chain of trust from root to zone (RFC 4035 §3.2.3)

Algorithm Observation: RSA/SHA-256 — MUST implement, widely deployed (RFC 8624 §3.1)
All current DNSSEC algorithms use classical cryptography. Post-quantum DNSSEC standards are in active IETF development (draft-sheth-pqc-dnssec-strategy) but no PQC algorithms have been standardized for DNSSEC yet.
Chain of trust: Root → TLD → Domain. DNS responses are authenticated and tamper-proof.
AD Flag: Validated - Resolver (8.8.8.8) confirmed cryptographic signatures
DS Record (at registrar):
45352 8 2 7708C8A6D5D72B63214BBFF50CB54553F7E07A1FA5E9074BD8D63C43102D8559

NS Delegation Verified

5 nameserver(s) configured

Nameservers: a0.nic.me a2.nic.me b0.nic.me b2.nic.me c0.nic.me
Multi-Resolver Verification Recon: Consensus reached - 5 resolvers (Cloudflare, Google, Quad9, OpenDNS, DNS4EU) agree on DNS records
Subdomain Discovery Not Applicable
Certificate Transparency subdomain enumeration is not applicable for registry suffixes. For me, CT logs would show registered domains under this zone rather than organizational subdomains. To analyze a specific domain's exposure, scan a registrable domain like example.me.
Δ No Propagation Issues: All DNS records are synchronized between resolver and authoritative nameserver.
DNS Intelligence What does DNS look like right now — and what changed over time?
DNS Evidence Diff Side-by-side comparison
Resolver Records (Public DNS cache)
Authoritative Records (Source of truth)
A 0 / 0 records
No records
No records
AAAA 0 / 0 records
No records
No records
CAA RFC 8659 §4 0 / 0 records
No records
No records
MX RFC 5321 0 / 0 records
No records
No records
NS RFC 1035 Synchronized 5 / 5 records
a0.nic.me.
b0.nic.me.
c0.nic.me.
b2.nic.me.
b0.nic.me.
c0.nic.me.
b2.nic.me.
a0.nic.me.
a2.nic.me.
a2.nic.me.
SOA RFC 1035 Synchronized 1 / 1 records
a0.nic.me. hostmaster.donuts.email. 1772638177 7200 900 1209600 3600
a0.nic.me. hostmaster.donuts.email. 1772638177 7200 900 1209600 3600
TXT RFC 7208 §4 0 / 0 records
No records
No records
DNS History Timeline BETA

When was a record added, removed, or changed — and could that change be the problem?

Analyze Another Domain

DATA FRESHNESS & METHODOLOGY

All security-critical records (SPF, DMARC, DKIM, DANE/TLSA, DNSSEC, MTA-STS, TLS-RPT, BIMI, CAA) are queried live from authoritative nameservers and cross-referenced against 5 independent public DNS resolvers (Cloudflare, Google, Quad9, OpenDNS, DNS4EU) at the time of each analysis. No security verdict uses cached data.

Registrar data (RDAP) is cached for up to 24 hours because domain ownership and registration details change infrequently. Certificate Transparency logs (subdomain discovery via RFC 6962) are cached for 1 hour because CT entries are append-only historical records. Sections using cached data are marked with a CACHED badge; live queries show LIVE.

Intelligence Sources

This analysis used 4 DNS resolvers (consensus), reverse DNS (PTR), Team Cymru (ASN attribution), IANA RDAP (registrar), crt.sh (CT logs), and SMTP probing (transport). All using open-standard protocols.

Full List
Verify Report Integrity SHA-3-512 Has this report been altered since generation? Verify below

This cryptographic hash seals the analysis data, domain, timestamp, and tool version into a tamper-evident fingerprint. Any modification to the report data will produce a different hash. This is distinct from the posture hash (used for drift detection) — the integrity hash uniquely identifies this specific report instance.

07accd20eb0958f97c04ff39e7d9b0fffbceaa924f30644fc29cbeb88acb861ea59b2247748f201a3bec2026b81efedeefc2c39db75900d7647c9af114f3e870
Evaluations reference 12 RFCs. Methods are reproducible using the verification commands provided. Results reflect DNS state at 4 Mar 2026, 15:34 UTC.

Download the intelligence dump and verify its integrity, like you would a Kali ISO or any critical artifact. The SHA-3-512 checksum covers every byte of the download — deterministic serialization ensures identical hashes across downloads.

After downloading, verify with any of these commands:

Tip: cd ~/Downloads first (or wherever you saved the files).

OpenSSL + Sidecar (macOS, Linux, WSL)
cat dns-intelligence-me.json.sha3 && echo '---' && openssl dgst -sha3-512 dns-intelligence-me.json
Python 3 (cross-platform)
python3 -c "import hashlib; print(hashlib.sha3_512(open('dns-intelligence-me.json','rb').read()).hexdigest())"
sha3sum (coreutils 9+)
sha3sum -a 512 dns-intelligence-me.json
Compare the output against the .sha3 file or the checksum API at /api/analysis/5748/checksum. Hash algorithm: SHA-3-512 (Keccak, NIST FIPS 202).

Every finding in this report is backed by DNS queries you can run yourself. These vetted one-liners reproduce the exact checks used to build this report for me. Our analysis adds multi-resolver consensus, RFC-based evaluation, and cross-referencing — but the underlying data is always independently verifiable. We are intelligence analysts, not gatekeepers.

DNS Records

Query A records (IPv4) RFC 1035
dig +noall +answer me A
Query AAAA records (IPv6) RFC 1035
dig +noall +answer me AAAA
Query MX records (mail servers) RFC 1035
dig +noall +answer me MX
Query NS records (nameservers) RFC 1035
dig +noall +answer me NS
Query TXT records RFC 1035
dig +noall +answer me TXT

Domain Security

Check DNSSEC DNSKEY records RFC 4035
dig +dnssec +noall +answer me DNSKEY
Check DNSSEC DS records RFC 4035
dig +noall +answer me DS
Validate DNSSEC chain (requires DNSSEC-validating resolver) RFC 4035
dig +dnssec +cd me A @1.1.1.1

Brand & Trust

Check CAA records (certificate authority authorization) RFC 8659
dig +noall +answer me CAA

DNS Records

Check HTTPS/SVCB records RFC 9460
dig +noall +answer me HTTPS

Domain Security

Check CDS/CDNSKEY automation records RFC 7344
dig +noall +answer me CDS

Infrastructure Intelligence

RDAP domain registration lookup RFC 9083
curl -sL 'https://rdap.org/domain/me' | python3 -m json.tool | head -50
Commands use dig, openssl, and curl — standard tools available on macOS, Linux, and WSL. Results may vary slightly due to DNS propagation timing and resolver caching.
Intelligence Confidence Audit Engine verified · 9/9 Evaluated
How confident are these results? Each protocol is independently verified against RFC standards. No self-awarded badges.
SPF
Verified 4877 runs
DKIM
Verified 4695 runs
DMARC
Verified 4860 runs
DANE/TLSA
Verified 4679 runs
DNSSEC
Verified 4858 runs
BIMI
Verified 4694 runs
MTA-STS
Verified 4697 runs
TLS-RPT
Verified 4699 runs
CAA
Verified 4691 runs
Maturity: Development Verified Consistent Gold Gold Master
Running Multi-Source Intelligence Audit

me

0s
DNS records — Cloudflare, Google, Quad9, OpenDNS, DNS4EU
Email auth — SPF, DMARC, DKIM selectors
DNSSEC chain of trust & DANE/TLSA
Certificate Transparency & subdomain discovery
SMTP transport & STARTTLS verification
MTA-STS, TLS-RPT, BIMI, CAA
Registrar & infrastructure analysis
Intelligence Classification & Interpretation

Every result includes terminal commands you can run to independently verify the underlying data. No proprietary magic.